
Trucks
Concrete agitator finance from 48+ Australian lenders.
Agitators are almost always bought against a plant contract. We look at the agreement, then structure the finance so the repayment fits your cubic metre rate.



One broker from your first call through to funding.
See which concrete agitator finance options fit your business.
Tell us what you are buying. A Lyft Money broker compares 48+ lenders and explains the rate, balloon, fees and total cost before you decide.
Access to 21+ concrete agitator finance lenders
Lenders on our panel that fund concrete agitator finance.
At a glance
Concrete agitator finance: the numbers that matter.
- Typical price
- $90,000 – $400,000
- Terms
- Up to 84 months
- Indicative rates
- 6.9% – 14.5% p.a.
- Typical speed
- 24–48 hours for low-doc up to $150k; longer for full-doc
- Usual structure
- Chattel mortgage
- Useful life
- About 15 years
In plain English
What is concrete agitator finance?
Concrete agitator finance is funding for a truck fitted with a rotating drum that carries wet concrete, secured against the vehicle. Agitators are usually bought by owner-drivers contracting to concrete plants in Australia, and lenders will normally want to see the cartage agreement behind the purchase.
The agitator owner-driver model is well established in Australia. A concrete plant contracts drivers who own their trucks, pays per cubic metre delivered, and provides the work and often the livery. It is a predictable way to run a truck, but margins are tight and utilisation depends entirely on how busy the plant is, which follows the construction cycle. Drivers usually carry fuel, tyres, servicing and insurance themselves, so the true cost per load is higher than it first appears.
That makes finance structure important. A term that lines up with the expected contract period, and a repayment sized on conservative rather than peak volumes, protects you when construction slows. Lenders will look at the agreement, your driving history and your credit file. Where you already own a truck outright, a sale and leaseback can release capital for a second unit, but compare the total cost carefully before going that route.
How lenders assess concrete agitator finance
Because agitator work is contracted, lenders treat the cartage agreement as a key part of the application. An owner-driver with a signed agreement from a recognised concrete supplier is a much stronger proposition than a speculative buy. Drum condition, blade wear and the chassis under it drive valuation, and lenders know agitators work hard in a corrosive environment. Deposits of 10 to 20 per cent are common for first-time owner-drivers. Age limits usually require the truck to be under 15 years at term end.
New or used
Used agitators come out of plant fleets regularly and are readily financed; new builds are typical where a specific drum size or livery is required by the plant.
Before you buy
- Inspect the drum internally for blade wear and build-up — reblading a drum is a significant cost and takes the truck off the road.
- Check chassis and cross-member corrosion carefully, since concrete and washdown water are hard on steel.
- Confirm the drum capacity and livery requirements with the plant you will contract to before committing to a build.
Commonly financed
- Kenworth T359 agitator
- Isuzu FVZ 260-300 agitator
- Iveco Acco agitator
- Mack Metro-Liner
- Hino 700 Series FS agitator



A clear next step
How to finance a concrete agitator.
Our AI helps check lender fit across 48+ lenders. Your broker reviews the options and explains what they mean for you.
- 01
Confirm the asset
Dealer or private sale, new or used, price and age of the asset.
- 02
Structure the loan
Term, deposit and balloon matched to cash flow and asset life.
- 03
Settle and collect
Lender pays the supplier directly; you take delivery.
- ID and ABN
- Invoice or quote for the asset
- Bank statements or financials depending on amount
The lender makes the final credit decision. Available options depend on your business and the lender’s assessment.
Before you make a decision
Estimate your concrete agitator repayments.
Adjust the price, rate, term and balloon to see the repayment and the total cost over the term.
- Number of repayments
- 60
- Balloon at end of term
- $49,000
- Total interest (est.)
- $69,353
- Total repaid (est.)
- $314,353
This calculator is a guide only. It uses simplified assumptions, excludes fees and charges unless stated, and is not an offer or quote. Actual repayments are confirmed by the lender in its loan contract.
From Lyft Money clients
Clear advice.
People who stay in touch.
Rated 5.0 from 340 Google reviews across the types of finance we arrange. Read them on Google.
“keeping us informed every step of the way”
“He explained all the financing options clearly”
“helped out my business”
Ways to finance a concrete agitator
Key terms
What is concrete agitator finance?
Concrete agitator finance is a secured loan or lease used to buy a concrete agitator truck, with the vehicle as security. Terms usually run 48 to 84 months and lenders commonly ask to see the cartage agreement with the concrete plant.
What is an agitator owner-driver?
An agitator owner-driver owns and operates their own concrete truck while carting exclusively or primarily for one concrete supplier under a cartage agreement. The driver carries the vehicle and running costs and is paid per cubic metre or per load delivered.
Can an owner-driver finance an agitator to work for a concrete supplier?
Yes. Agitator owner-drivers are common, and lenders finance them on the strength of a cartage agreement with a concrete company, driving history and a clean credit file. New ABNs usually need a deposit of 10 to 20 per cent; established operators are often approved with no deposit. The cartage agreement is the key document, so include it.
Can the bowl be financed with the cab chassis?
Yes. The agitator bowl, hydraulics, chute and water system can be financed with the truck when quoted together, so the complete agitator settles on one contract. Bowl builders invoice separately from the truck dealer; your broker combines them into a single approval.
Can I finance a used agitator truck?
Yes. Used agitators are assessed on the truck’s age and kilometres and the bowl’s condition, including drum wear and build-up. Mainstream lenders take trucks up to about 12 to 15 years old at the end of the term; specialist lenders take older units on shorter terms. An inspection supports the application.
What does agitator finance cost per month?
As a guide, a $250,000 new agitator over five years with a 20 per cent balloon costs roughly $4,300 to $4,800 a month depending on the rate and the business. Use the calculator on this page for your figures and your broker firms up the number with a real quote.
Do I need a deposit for equipment finance?
Often no deposit is required, particularly for established businesses buying standard assets from a dealer. A deposit is more likely where the business is new, the asset is older or specialised, the credit profile is weaker, or the amount is large relative to turnover. Deposits typically range from around 10% to 30% in those cases. Putting money in reduces the amount financed and can improve the terms offered, but it is not always necessary.
What fees are normally charged on equipment finance?
The common ones are an establishment or documentation fee charged at settlement, a monthly account-keeping fee, and a PPSR registration fee for recording the lender's interest in the asset. A brokerage fee may also apply, which we disclose to you in writing before anything is submitted. Some agreements include an early termination or break cost. Fees vary by lender and are typically a modest part of total cost compared with the interest, but they should still be compared.
How large a balloon can I set?
Lenders publish maximum residual or balloon percentages that fall as the term lengthens, because the asset is worth less at the end of a longer term. For a vehicle, a common pattern is up to roughly 50% on a two-year term, reducing to around 20% to 30% on a five-year term. The ATO also sets minimum residual values for finance leases. A larger balloon lowers monthly repayments but increases total interest and leaves a lump sum to deal with at the end.
Is hire purchase still used in Australia?
It is far less common than it once was. Under hire purchase the financier owns the asset and you hire it, with ownership transferring automatically after the final instalment. Since the GST changes that made chattel mortgage more attractive for businesses accounting on a cash basis, most equipment lending is written as a chattel mortgage or lease instead. Some lenders still offer commercial hire purchase, and your accountant can advise whether it suits your circumstances.
What is PPSR registration and why does the lender do it?
The Personal Property Securities Register is the national register of security interests in personal property, including vehicles and equipment. When a lender finances an asset, it registers its interest so the security is publicly recorded and its priority is protected if the asset is sold or the business fails. It also means a buyer searching the register will see the finance. The registration is released once the contract is paid out, and a small registration fee is usually passed on to you.
How does a balloon payment work on a chattel mortgage?
A balloon is a lump sum left to pay at the end of a chattel mortgage, which lowers the regular repayments during the term. For example, a 30 per cent balloon on a $100,000 vehicle leaves $30,000 to pay at the end, so the monthly amount is calculated on $70,000 plus interest on the full balance. Balloons are commonly set between 0 and 40 per cent depending on the asset and term, and at the end you can pay it out, refinance it or sell the asset to clear it. A balloon reduces monthly cost but increases total interest, so your broker shows both figures side by side.

Your business. Your decision.
See your options.
Know the costs.
Decide with confidence.
One broker to explain it. Clear numbers before you proceed.
No obligation to proceed.




